Frequently asked questions
These are the most common questions that may arise in relation to Casa Natuendo Wallpaper. However, if you do not find the answer to your question in this section, do not hesitate to contact us.
Format and material
Which wallpaper format do I work with?
The wallpaper is produced to order in roll format in Non Woven quality.
The roll size is 50 cm wide and 1000 cm long.
If you need to see a proof to see the textures and colours it is best to order a sample - the standard sample size we work with is 16 x 25 cm.
Main characteristics of Non Woven
El Non Woven -N- es lavable y tiene una textura lisa y mate, se asemeja al papel tradicional.
Además la calidad Non Woven es 100 % ecológica.
How to calculate the number of rolls you need?
To calculate the number of rolls round up:
- Wall width (+3 cm)
- Wall height (+3 cm)
- Selected design. In the specifications of the design the repetition in cm is indicated. This measurement is necessary to know how many panels will come out of each roll.
If you have any doubts, do not hesitate to contact us, it is important to calculate the rolls correctly as we work to order and between one dyeing and another there is the possibility of a slight change in colour.
¿Cuáles son los plazos de entrega?
Each roll of wallpaper is printed exclusively for you, and as it is made to order, delivery times are extended.
We ship our orders within 20 days -delivery time for deliveries within Spain-. You can always track your order by contacting us via email and with the tracking number that you will receive once the shipment has been made.
This delivery time is an estimate, you will most likely receive your order before the stated delivery time.
Placement instructions most likely you will receive your order earlier than stated.
First of all
Check that the wall is clean, smooth, free of imperfections and dry. If there is previous wallpaper, it must be completely removed. Eliminate colour differences or contrasts. The surface must have a uniform colour.
Step 1
Gather the necessary tools for installation: scissors, cutter, cellulose wallcovering glue (non-woven quality), brush or roller, rubber wallcovering spatula, rag, bucket and a long ruler.
Step 2
Cut the first panel, taking the height of the wall as a reference. Add 3 cm/1.18‘ at the top and bottom - total wall height + 6 cm/2.36’.
Step 3
Prepare the cellulose glue in a bucket according to the manufacturer's instructions.
Step 4
Apply the cellulose glue only with a brush or roller on the wall and spread it evenly over the entire surface. For optimum adhesion, apply the glue on a slightly larger surface than the panel.
Step 5
Apply the first dry panel from left to right and from top to bottom, smoothing it with a plastic spatula or cloth to remove air bubbles.
Step 6
Check the match of the second panel before repeating the cutting process in No. 2, and before repeating the processes in No. 4 - applying the glue - and No. 5 - applying the wall cladding and smoothing it - as many times as necessary to cover the wall. The joints of the cladding panels must not overlap.
Step 7
Gently remove any glue residue with a damp cloth.
Step 8
Cut the rest of the wall covering with a cutter, using a ruler to guide the cutter.
Returns and exchanges
Privacy policy
